2007 Honda s2000
$32,500
For sale is my 2007 Honda S2000 Track, HPDE, Time attack car
Current engine and suspension has 775 total miles on it. 5 Track days
Car is currently wrapped but is Laguna Blue underneath
Clean title in my name, currently registered and insured, although I only drive it on the street to bed in brakes.
I've owned this car 7 years, tracked it nearly every month until the stock motor finally let go at 113,000 miles due to fuel starvation.
I then had a 4pistons 2.5L race engine built for it which took over a year. At that time I upgraded the suspension to Ohlins and had it tuned on a Haltech 1500 at induction performance in Tampa, FL to 275whp.
4pistons will tell you the engine can do well over 300whp with a better intake and exhaust, but I just wanted a reliable track car and didn't want to mess with ITBs.
Car tracks absolutely perfect, it is the most fun I've had on track by far, but I have a young son now, and tracking the car once a month has turned into 3 times a year, and if the car has interest at my asking price, it's not worth keeping it sitting in my garage, if the car doesn't bring interest and isn't worth that much, I get to keep it and enjoy it 3 times a year and I'm very ok with that too.
Only cons are one headlight was gutted previously for an intake, and there is a some damage on the driver side rear quarter panel from previous owner, which I've included a photo of.
I can provide videos of the car on track, it ran a 2:15 at Daytona, a 1:18.7 at Roebling Road, a 1:18.1 at The Firm, and 1:40 something at Road Atlanta. Car is faster than I am obviously.
I'm happy to answer any questions from serious buyers. I've tried to include all the information on the car I was able to dig up, but there's so many little things I'm sure I've left out. I don't check facebook often, so emailing me at [email protected] would be the best way to get in touch. Thanks for looking.
$32,500
No Trades
Engine:
4Pistons 2.5L Road Race Engine
RR rigid ductile iron sleeve (F20C or F22C) 99mm stroke x 89.5mm bore
Honda 99mm Forged Crankshaft
4P I-beam long rod connecting to an 18mm tool steel wrist pin
4P Wiseco strutted box forged ultra lightweight piston, armor plated, 89.5mm high compression
ACL race bearings, ARP fasteners, exclusive 4P spec head gasket for better seal
4P Pro S2K CNC Cylinder head, 4P custom valves, Ferrea PAC HD valve springs, retainers, and locks
4P tool steel billet RR4 iVTEC camshafts with adjustable cam gears
4P Ported oil pump and baffled sump
All new Honda timing components and hardware
4P PRO S2K CNC HEAD
Manganese bronze valve guides
Ferrea valve lock kit
Ferrea 6000 valve set
Viton valve seal set
RR4 camshaft set
Assemble, hot tank and soda blast
275WHP Tuned by Induction performance on E30
PLM header
BERK Exhaust
Setrab Oil Cooler
Renegade Motorsports Catch can and coolant Overflow tank
Koyorad Radiator
Injen Intake
Transmission:
Stock Ap2 Transmission with clutchmasters FX400 Clutch
Spare Ap2 Transmission which needs a rebuild
Diff:
Puddymod 1.5 Diff
Fuel:
775cc Injectors
Flex fuel optimized for E30, but you can run anything from 93 to E85.
Radium Fuel rail
Radium Fuel Surge tank custom mounted in trunk
Suspension:
Ohlins Road & Track DFV Kit w/ Swift (S2000) Race Valved 14/12kg
Saner Front Sway
FPSpec Rear Sway bar 21mm
Megan Racing Roll Center Adjusters
Brakes:
Stoptech St-40 BBK
Hawk DTC-70 pads
Stoptech slotted rear rotors Hawk DTC70 Pads
All Stainless lines
LHT Performance Brake Booster brace
Wheels/tires:
2 Sets of Forgestar F14 17X10 +52 wheels, one set in black, one in gunmetal.
2 sets of Hoosier R7s, 1 set of BF Goodrich Slicks
Body/Aero:
Shine Auto Spoon Front bumper
Voltex Front and Rear Over Fenders
Nine Lives racing big wing, Baero End Plates
Custom Alumalite front splitter for Spoon replica Bumper
Stock AP2 Bumper and OEM Lip included in sale
Cutom Alumalite undertray for Spoon bumper for high speed tracks like Daytona where you don't need a splitter.
Interior:
Full roll cage by BSI racing in Daytona beach 1.75 .095 WALL
Fire supression with nozzles in engine bay, interior and trunk
OMP HTE-R400 halo Seat
Sparco 6 point harness
Cool shirt tray and system in passenger seat location
Sparco quick release and steering wheel
Electronics:
Haltech Elite 1500
Haltech IC7 dash
Flagler Beach, FL
