Surge Tank - Underhood Mounted Mechanical Fuel Injection Alkydigger 615-457-3192
Underhood mounted “Surge Tank”
Billet Construction -100% Welded
Hard Anodized inside and outside.
Internal Industrial Float mechanism to regulate the fuel level.
Allows you to use an rear electric pump to move fuel to the front so that a mechanical injection system pump can be used without starving for fuel. Electric pump can be any size large enough to power a carbureted engine, but if it is over 7psi you will need to regulate it down. It doesn't matter if the pump is large as long as you regulate it to 7 psi or less
Has two (2) built in return ports for your by pass valves to return the fuel to.
Has a large ¼” NPT breather vent port on top.
Comes equipped with a sight glass to monitor fuel level.
Float is easily removed to service, clean, or replace if needed.
-12AN outlet can be reduced to -10 or -8 if desired.
Holds approximately 1.25 gallons.
Dimensions: 11" tall (12" to the top of fitting) x 8" in diameter
Is constantly being filled from your electric pump, as well as your returned fuel.
Has optional billet mounts that are able to be moved for convenient mounting.
Select the fittings kit and you get the top 3 fittings and the drain plug for the bottom
Alkydigger inc. Not responsible or liable for damage or fire done to any vehicle as a result of high performance parts that are sold on this site. Racers and Users understand that racing and rodding can be dangerous, and result in personal damage, and accept that responsibility
options - see online ad
Mounts
(2) Billet Mounts (+$40.00)
Choose Outlet Size
12AN (Standard)
10AN (+$8.00)
8AN (+$8.00)
Fittings
(3) 6AN to 1/4" NPT and (1) 1/4" NPT Plug (+$24.00)