Good Project!! Hammerhead Twister 2 Seater Frame, the frame is in great condition no bends or rust, dusty from sitting in the shop, needs sanding and paint. It has a 2000 model Honda 300ex Engine bolted to the frame. It will need a few more brackets fabricated and welded in. I have had the engine running prior to installing it in the kart. It has a manual clutch, 5 Speed trans with reverse. These are strong engines, should be a lot of fun when finished. I saved everything off the quad that I thought would be useful including.. Complete wiring harness with all electronics ignition etc, clean carburator, complete air box and air filter assembly, complete exhaust system, throttle and clutch cables and levers, All bolts and hardware etc.. I also have the seat frame and also some extra parts for the kart frame including a larger capacity fuel tank, extra complete front suspension setup with brakes, a arms, spindles and hubs etc.. which is all included. The rear axle is newer and has been flipped to accept the quad engine. I installed 300ex rear hubs to make the rear end track width wider to match the front. The rear wheels are 300 ex Douglas aluminum rims. Again, This is a project, should be fun to finish! $500 Cash for everything seen and mentioned here. Pickup is in Cleburne, Tx. Call Me if you are interested, Thanks